B IQN:
Enter the actual iSCSI IQN name here.
Recommended Format: iqn.yyyy
-
mm.domain:device.ID
This IQN name is the same name used in the Perception dialog
External storage setup: iSCSI Target
-
Target name
(see chapter
“Interface/Controller Module” in the GEN series Data Acquisition
System” manual.
C Enable CHAP
If logon Password protection is needed, select this
check box.
Note
CHAP is used to authenticate iSCSI Initiators before using the iSCSI
Target.
D CHAP Name:
Enter a name to be used for login to the iSCSI.
E
CHAP Password:
Enter a password; minimum 12 characters.
F
CHAP Confirm Password:
Re
-
type the password.
G Enable Mutual CHAP
will require both the initiator and the target to
authenticate each other before communicating.
When done, click
Next
.
GEN3t
I3995-3.1 en HBM: public
941