11
If the mainframe is detected in a direct connection setup, there are a
number of potential problems in the network that can prevent the
mainframe from communicating with Perception. Most likely, one of the
network components in the connection from Perception to the mainframe
is either incorrectly configured or broken. Ask the network administrator to
determine the cause of the problem.
12
Perception/GEN series use a number of multicast and broadcast ports and
addresses to allow detection of the mainframe in the network. These ports
and addresses should be open for communication in the network. A
detailed overview of the ports and addresses used can be found in
"Network protocols and ports" on page 157.
13
For more information, please refer to the I2689 Perception User manual:
Chapter “Data Sources navigation”, topic “To add an unlisted system”
14
To restore a GEN3t to its default network settings, follow the steps in
chapter "Restore default network settings" on page 93.
GEN3t
856
I3995-3.1 en HBM: public