l
Password:
Enter the details that were defined during the setup process of the
CHAP authentication on the NAS. If none was chosen, leave this field
blank.
Click
Apply
when done to set the new settings and then click
Close
.
The NAS should now be available in the setup of your GEN series mainframe.
Figure 11.30:
Storage location with options
11.5.13
Set up an iSCSI NAS connected to a corporate network – Basic setup
This is a setup of a GEN DAQ system with the NAS connected through an
Ethernet switch on a company network.
The NAS location is not restricted and allows freedom when placing each
component in the system. This setup enables network access to configure the
NAS or GEN DAQ and to read the data on the iSCSI storage device via the
GEN DAQ system.
Note
Data on the iSCSI storage device is only readable on a PC when using a
GENDAQ system to do so.
GEN3t
I3995-3.1 en HBM: public
193