Front View
RESERVED
RESERVED
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
SIG. GROUND
SIG. GROUND
SIG. GROUND
5 V output
5 V output
5 V output
RESERVED
RESERVED
CH 8 NEG.
CH 8 POS.
CH 7 NEG.
CH 7 POS.
CH 6 NEG.
CH 6 POS.
CH 5 NEG.
CH 5 POS.
CH 4 NEG.
CH 4 POS.
CH 3 NEG.
CH 3 POS.
CH 2 NEG.
CH 2 POS.
CH 1 NEG.
CH 1 POS.
RESERVED
CH 16 NEG.
CH 16 POS.
CH 15 NEG.
CH 15 POS.
CH 14 NEG.
CH 14 POS.
CH 13 NEG.
CH 13 POS.
CH 12 NEG.
CH 12 POS.
CH 11 NEG.
CH 11 POS.
CH 10 NEG.
CH 10 POS.
CH 9 NEG.
CH 9 POS.
17
Figure K.7:
Pin diagram 16 channel connector
Note
Both positive and negative pins must be connected to avoid erroneous
measurement results with noise.
Note
There are three output pins available on each connector. Each pin's output
voltage is 5 V. The maximum current for each pins is 0.1 A. When connecting
all three pins 0.3 A can be used.
Over current protection is add for the maximum 0.3 A using an automatic
resettable fuse.
For more information on the 16/32 Channel Basic Card 20 kS/s input card,
please refer to "B3264-3.1 en (GEN series GN1611)" on page 1085.
GEN3t
I3995-3.1 en HBM: public
963