Or
If the NAS server is connected to the optical network connector of the GEN
series mainframe, then select the optical 1 Gbit Ethernet.
Figure 11.29:
Network interface connections/Optical 1 Gbit option
4
iSCSI Host
-
B)
l
DNS name/IP address
A DNS setting is not used in this setup. When DNS is not available,
the IP address must be filled in. Therefore, select the IP address option
and use the same IP address that was defined during the NAS setup
process.
When using a Synology
®
NAS, the IP address is displayed in the
Synology
®
Assistant software. This software displays all the known
connected Synology
®
devices.
(For more information, please refer to
Figure I.5 "Synology Assistant" on page 934).
l
Port number:
Default:
3260
This can sometimes be found in the NAS configuration of the
manufacturer
’
s software.
When using a Synology
®
NAS, the port number must be set to the
default number 3260.
5
iSCSI Target
-
C)
l
Target name (IQN):
This is the IQN name and it can be found using the manufacturer's
software supplied with the NAS.
For an example of setting up
Synology
®
iSCSI, please refer to “Setting up the iSCSI using
Synology
®
l
Select
Use CHAP
if CHAP password protection was selected when
the NAS server was set up.
When using a Synology
®
NAS, CHAP
password protection can be selected.
(For more information, please refer to
Figure I.11 "Create a new iSCSI Target dialog" on page 940).
l
User name:
Enter the details that were defined during the setup process of the
CHAP authentication on the NAS. If none was chosen, leave this field
blank.
GEN3t
192
I3995-3.1 en HBM: public