For this example, connect one B
-
Txx CON2 Speed and wire it to the Ch B9
counter (Pins 13, 14, 15 on the digital input connector).
Note
Perception allows you to view each of the inputs individually as an event
channel in addition to seeing the counter result.
The reset signal is Ev B7_01, the input F1
-
is Ev B7_02 and the input F1+
is Ev B7_03. If you only need to view the Timer/Counter result and have no
interest in the individual signals, do not activate the event channels. This will
decrease the size of the final data file by not recording channels that are not
needed.
Figure H.25:
Channels in Perception
A
Reset
B
F1
-
C
F1+
D
B
-
Txx CON2 Speed
GEN3t
I3995-3.1 en HBM: public
921