l
User name:
Enter the details that were defined during the setup process of the
CHAP authentication on the NAS. If none was chosen, leave this field
blank.
l
Password:
Enter the details that were defined during the setup process of the
CHAP authentication on the NAS. If none was chosen, leave this field
blank.
Click
Apply
when done to set the new settings and then click
Close
.
The NAS should now be available in the setup of the GEN series mainframe.
Figure 11.34:
Storage location with options
11.5.14
Set up an iSCSI NAS connected to a corporate network – Advanced setup
This is a setup of a GEN DAQ system with the NAS connected through an
Ethernet switch on a corporate network.
Compared to the Example 3 ("Set up an iSCSI NAS connected without an
Ethernet switch" on page 189), this setup allows a separation of the network
data sent from the PC to the GEN DAQ system and the network data sent from
the NAS to the GEN DAQ system. This setup is recommended if high streaming
rates to the NAS system and a lot of live displays to view the data on the
controlling PC is required.
The NAS location is not restricted and allows freedom in placing each
component in the system. This setup enables network access to configure the
NAS and GEN DAQ and to read the data on the iSCSI storage device.
GEN3t
I3995-3.1 en HBM: public
197