Genesis GEN3t, User Manual

Page: 920 / 1124

The Timer/Counter channels that are active depend on which pins of the Digital
I/O connector are used:
30 29 28 27 26 25 24 23 22 21 20 19 18 17
16
32 33 34 35 36 37 38 39 40 41 42 43 44
1
2 3 4 5 6 7 8
9
10 11 12 13 14 15
31
16 30
44
15
1
31
PIN 17 - Event Input 5B
PIN 16 - Event Input 4B
PIN 18 - Event Input 6B
PIN 19 - Event Input 7B
PIN 20 - Event Input 8B
PIN 21 - Event Input 9B
PIN 22 - Event Input 10B & Reset Timer/Counter 1B
PIN 31 - Event Input 15B & External Stop B
PIN 32 - Event Input 16B & External Start B
PIN 33 - Event Input 13A
PIN 34 - Event Input 14A
PIN 35 - Event Input 15A & External Stop A
PIN 36 - Event Input 16A & External Start A
PIN 37 - Event Output 2B
PIN 38 - Event Output 1B
PIN 39 - Event Output 2A
PIN 40 - Event Output 1A
PIN 41 - Ground
PIN 42 - Ground
PIN 43 - +5 V Power
PIN 44 - +5 V Power
PIN 23 - Event Input 11B & Direction Timer/Counter 1B
PIN 24 - Event Input 12B & Clock Timer/Counter 1B
PIN 25 - Event Input 13B
PIN 26 - Event Input 14B
PIN 27 - Ground
PIN 28 - Ground
PIN 29 - Ground
PIN 30 - Ground
PIN 1 - Event Input 1A & Reset Timer/Counter 2A
PIN 2 - Event Input 2A & Direction Timer/Counter 2A
PIN 3 - Event Input 3A & Clock Timer/Counter 2A
PIN 4 - Event Input 4A
PIN 5 - Event Input 5A
PIN 6 - Event Input 6A
PIN 7 - Event Input 7A
PIN 8 - Event Input 8A
PIN 9 - Event Input 9A
PIN 10 - Event Input 10A & Reset Timer/Counter 1A
PIN 11 - Event Input 11A & Direction Timer/Counter 1A
PIN 12 - Event Input 12A & Clock Timer/Counter 1A
PIN 13 - Event Input 1B & Reset Timer/Counter 2B
PIN 14 - Event Input 2B & Direction Timer/Counter 2B
PIN 15 - Event Input 3B & Clock Timer/Counter 2B
A
B
C
D
Figure H.24: Pin diagram for Digital Event/Timer/Counter connector
A
Card A
-
Txx CON2 Speed Channel A9
B Card A
-
Channel A8
C
Card B
-
Txx CON2 Speed Channel B9
D
Card A
-
Channel B8
In this example (see Figure H.24), Recorder A and Recorder B are 1kV modules
(six channels each). The event channels supported by the module are assigned
the next available channel number after the analog channels. In this case, that
is Channel 7; for Recorder B, the event channels are assigned channel names
of Ev B7
-
01 to Ev B7
-
16.
The two counter timer channels supported by Recorder B are Channel B8
(Timer/Counter2A, see Figure H.24) and Channel B9 (Time/Counter2A, see
Figure H.24 ). In Perception, the channels are named Ch B8 and Ch B9 (see
Figure H.25).
GEN3t
920 I3995-3.1 en HBM: public