manualshive.com logo in svg

Genesis GEN3t, User Manual, Page: 930 / 1124

Share
Download
Genesis GEN3t User Manual Download Page 930

I.1.1

RAID 0 – Striping

In a 

RAID 0

 system, storage is split into blocks that are written split across all

the drives in the array. Using more disks in one RAID 0 system offers higher
storage rates. The performance also depends on the RAID controller used.

BLOCK 1

BLOCK 3

BLOCK 5

BLOCK 7

BLOCK 2

BLOCK 4

BLOCK 6

BLOCK 8

DISK 1

DISK 2

RAID 0

Striping

Figure I.1: 

RAID 0 – Striping

Advantages

l

Great performance, both in read and write operations.

l

All storage capacity is used; there is no disk overhead.

l

Volume size grows with every extra disk added.

l

The technology is easy to implement.

Disadvantages

l

Not fault

-

tolerant. If one disk fails, all data is lost.

WARNING

It should not be used on mission

-

critical systems.

GEN3t

930

I3995-3.1 en   HBM: public

Summary of Contents for GEN3t





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments