Figure 11.55:
Mainframe Network Setup
A
Optical 10 Gbit NIC1
B
Optical 10 Gbit NIC2
C
Make this the preferred network for connection with Perception
In
Mainframe Network Setup
you can define the IP address of each individual
interface if needed.
If Perception finds more than one interface for
Network Selection
as shown in
Figure 11.55, then the interface that has a Check in the box
Make this the
preferred network connection with Perception
will be the interface used for
communication with Perception. For the 10 Gbit Ethernet card check the box
for the
Optical 10 Gbit
NIC1 or 2
.
Click
Apply
then
Close
when done.
GEN3t
216
I3995-3.1 en HBM: public