The External Storage Setup dialog:
The information in this dialog must match the information defined in the
configuration of the connected NAS. Refer to the appendix “Setting up the
iSCSI using Synology
®
NAS” on page 934 when necessary for an example
using Synology
®
.
Figure 11.23:
External Storage Setup (Set up an iSCSI NAS connected
across an Ethernet switch)
A
GEN Data acquisition system
B
iSCSI Host
C
iSCSI Target
3
GEN Data acquisition system
-
Network
interface:
(See Figure 11.23
-
A)
Select the Standard 1 Gbit Ethernet port that is connected to the Ethernet
switch.
Figure 11.24:
Network interface connections/Standard 1 Gbit option
GEN3t
I3995-3.1 en HBM: public
187