5.2
Connecting power
The power inlet and the protective ground connection are located at the top of
the GEN3t system. A mains power cord that is in accordance with the
destination country's standards is shipped with the unit. For more information
on power consumption, please refer to chapter "Mains Power" on page 69.
Figure 5.1:
GEN3t Portable Data Recorder
A
Power inlet
The power inlet connects/disconnects the main power from the GEN3t. To
disconnect the GEN3t from the AC supply completely, unplug the IEC
connector from the instrument.
Plugging in the unit will not switch on the GEN3t instrument. Use the standby
button on the front panel for this purpose; see "GEN3t control" on page 114.
GEN3t
70
I3995-3.1 en HBM: public