80
4. Operation of systems and equipment
Hazard warning lamp
If you press the switch with ignition in any
position, the red indicator lamp on the switch
will flash and the hazard warning lamp will be
turned on. Press this switch again to turn off
the hazard warning lamp.
If the hazard warning lamp is turned on, all
turn signal lamps and the indicator lamps
and on the instrument cluster will flash
simultaneously.
The hazard warning lamp shall be turned
on in the following cases so as to attract the
attention of persons on the road and reduce
the risk of traffic accidents:
-
The vehicle is involved in any failure.
-
The vehicle is at the tail end of a traffic
jam.
-
The vehicle tows another vehicle or is
towed.
-
The vehicle is temporarily parked due to
poor visibility.
NOTE
● The use of the hazard warning lamp will
consume the battery power, so please
turn it off when not in use.
● Be sure to strictly abide by the relevant
regulations when using the hazard
warning lamp.
● In the event of an emergency, if the
hazard warning lamp is faulty, other
methods that comply with the relevant
traffic rules and regulations must be
taken to attract the attention of persons
on the road.
Vehicle assisted lighting
-
If you press the unlocking button on
the remote control key within the effective
range, the position lamps will stay on for
25 s for the purpose of helping you to
approach your vehicle. If you press the
unlocking button on the remote control
key again, the position lamps can stay
on for another 25 s. When you get in the
vehicle and switch the ignition to the “ON”
position, the position lamps will go out.
Vehicle locating lighting
-
If you press the locking button on the
remote control key twice within 0.5 s, the
position lamps will stay on for 8 s and
the turn signal lamps will flash 3 times for
the purpose of helping you to locate your
vehicle.
