33
3. Safety Operating Instructions
Locking clip
If no means are provided on the child safety
seat for securing the seat belt, please install a
locking clip on the seat belt.
-
After the above steps 1 and 2, pull up the
shoulder belt and make sure the lap belt
is tensioned.
-
Firmly grasp the seat belt near the
tongue. Pinch the two parts of the seat
belt together so that they do not slip out of
the tongue. Unbuckle the seat belt.
Install the locking clip as shown. Place the
buckle as close as possible to the locking tab
and insert the locking tab into the locking clip.
Go to steps 6 and 7.
Installing LATCH or ISOFIX system
The rear seats (2nd-row) of this vehicle are
equipped with the LATCH system, and thus
suitable for the LATCH or ISOFIX child safety
seats. The installation instructions of the
LATCH child safety seat are as follows.
WARNING
● The child safety seat anchorages
installed in this vehicle can be used
to fix the child safety seats only.
● Do not connect straps, hard and
sharp objects or any other objects
other than child safety seats to the
anchorages; otherwise, children may
be endangered in the event of an
accident.
2nd-row seats
Open the cover, then you can see the front
anchorage
①
on the 2nd-row seat.
