232
5. Driving guide
Activation/deactivation/pause/interruption
of APA
Manual selection
of parking bay
Automatic
parking in
A parking bay is searched. Please park
1. Activation
-
APA button: After the vehicle is started,
press the APA button
to activate the
APA.
-
Voice wake-up: Activate the APA by
saying “Turn on APA”, “Activate APA” or
“Start APA”.
2. Close
-
APA button: Press the APA button
again to deactivate the APA.
-
Exit button: Touch the “×”
①
in the upper
left corner to deactivate the APA.
3. Pause
-
After the APA is activated, the driver can
press the APA button, or depress the
brake pedal, or opening a non-diver’s
door to pause the APA.
4. Interruption
-
After the APA is activated, the driver can
touch the exit button, or turn the steering
wheel, or depress the accelerator pedal,
or operate the gearshift lever, or press the
“P” position button, or unfasten the seat
belt, or open the driver’s door to interrupt
the APA.
Limitations
APA may involve safety risk and fail to operate
normally under the following conditions:
-
Narrow parking bays.
-
Existence of the following objects in the
parking bay: objects that cannot reflect the
radar signal well, and objects that are not
within the detection range of the ultrasonic
sensor, such as columns, stones, sharp
and thin objects, strip/flake-like objects,
suspended objects, ground locks and
other low objects, etc.
-
Large road slopes.
-
Poor visibility (due to night, heavy rain,
snow, fog, etc.).
-
Curb made of other materials than stone,
or low curb out of the detection range.
