113
4. Operation of systems and equipment
⑩
Fan speed down button
⑪
Temperature control button
⑫
AUTOmode button
⑬
OFFbutton
⑭
Air supply mode button
⑮
Fan speed adjustment button
Temperature display
The temperature setting button on the front
A/C interface of the AV system is used to set
the target temperature of the left and right
front areas, and the temperature values are
respectively displayed on the display of the AV
system.
The temperature setting button on the rear
HCP and the temperature setting button on
the rear A/C interface of the AV system can
be used to set the rear temperature, which is
displayed on the LCD of the rear HCP and the
AV system display.
-
Press “TEMP” on the AV system display
to adjust the temperature by swiping up
and down in increments of 0.5°C.
Temperature control button
-
The indoor temperature can be set by
operating the
and
buttons. The
temperature starts to scroll when the
button is pressed and held or (more
than 0.5s), and stops scrolling when the
button is released.
-
The set temperature is adjustable
within18.5~31.5°C at increments/
decrements of 0.5°C When the set
temperature is lower than 18.5°C, the
temperature is displayed as LO, when the
set temperature is higher than 31.5°C, the
temperature is displayed asHI.
In AUTO mode, when LO/HI is displayed, the
system will keep high air volume.
In AUTO mode, in order to obtain the
most satisfactory indoor temperature, it
is recommended to set the temperature
to 25.0°C, and adjust the temperature if
necessary.
CAUTION
The temperature value displayed on the
AV system display is the target value of
temperature setting, not the actual measured
value of the indoor temperature.
A/C button
The A/C system will start cooling if the A/C
button is pressed.
The A/C system will stop cooling if the A/C
button is pressed again.
Air volume setting
Press
or to increase/decrease the air
speed by one level. The AV system display
shows the corresponding fan speed level.
I n A U TO m o d e , t h e A / C s y s t e m w i l l
automatically control the fan speed, and
operating the or button will change the
system state from AUTO mode to manual
mode.
Turning off of A/C
Click the soft key on the AV system display
or the rear A/C OFF button to turn off the A/C
system.
After the A/C system is turned off:
-
Operating the
button, button or
will not turn on the A/C system.
