211
5. Driving guide
NOTE
The system will automatically return to
normal if any of the following conditions is
met:
● The camera re-identifies the driver’s
face information.
● The vehicle is powered off and the
engine is restarted.
CAUTION
After the function enters the working mode,
due to the characteristics of the fatigue
algorithm, the fatigue monitoring function
needs 1 minute to complete the initialization
and will not work in this process.
WARNING
● Even if the cabin monitoring system
is provided, you are still responsible
for concentrating on driving with
care.
● If you feel tired, take regular breaks
as needed and do not keep driving till
the system warns you.
● Some special circumstances may
cause the system to issue a warning
even if you are not tired, for example,
your eyes are closed for a certain
period of time.
● The system cannot guarantee
accurate identification of every driver,
and some drivers’ facial features may
not be accurately captured.
● The system does not recognize the
need for a break in all situations.
CAUTION
● Please abide by the national road traffic
safety law and relevant implemented
regulations for driving safety.
● Do not block the driver monitoring
camera on the left front (A pillar) and the
interior monitoring camera above the
interior rearview mirror.
● Do not put trims on covers over the left
front A-pillar and interior rearview mirror,
neither install any other parts on these
covers. Covers over the left front A pillar
and interior rearview mirror contain
sophisticated detection devices. The
behavior described above may damage
the devices or cause failure to correctly
detect the real-time status of the driver.
● The cabin monitoring system function
relies on a clear state image of the
driver and passengers. Some cases
such as strong direct sunlight, seat or
steering wheel adjustment and rear
occupants’ faces blocked by front seats
will result in incomplete monitoring data
of the driver and passengers, and may
cause performance degradation.
