251
6. In-service maintenance
-
Open the fuel tank cap completely,
and slowly unscrew the fuel filler cap
counterclockwise as arrowed. Keep the
fuel filler cap at the original place for a
while before it is unscrewed completely to
allow fuel tank to release the fuel vapor
inside, and then remove it.
-
Hang the fuel filler cap on the inner side
of the fuel tank cap and start adding fuel.
-
After adding the fuel, tighten the fuel filler
cap clockwise till a click is heard, which
indicates that the fuel filler cap has been
tightened.
NOTE
Grade of fuel: 95# or above high-quality
unleaded gasoline.
NOTE
This model complies with China VI
emission standards. The fuel supply system
of China VI is designed with a closed fuel
and gas recovery system. During refueling,
the fuel gun switch may be triggered due
to high ambient temperature or high fuel
flow rate, and the fuel gun is switched off
when the fuel tank is not filled fully. This
is a normal phenomenon. At this time, the
refueling speed shall be slowed down.
CAUTION
Low-grade fuel or substandard fuel may
damage the engine or make the engine fail
to meet performance requirements.
