76
4. Operation of systems and equipment
Turn signal lamp
-
When the ignition is in the “ON” position, if
you turn the lamplight combination switch
up or down to the limit position
①
, the
right or left turn signal lamp will go on, and
the corresponding indicator lamp or
on the instrument cluster will flash.
Turn signal lamp flashing for lane change
-
In case of lane changing or overtaking, if
you quickly turn the lamplight combination
switch up or down to the position
②
and
then release it to the original position, the
corresponding turn signal lamp and the
indicator lamp or on the instrument
cluster will flash 3 times.
-
If you turn the lamplight combination
switch up or down and hold it at the
position
②
, the corresponding turn
signal lamp and the indicator lamp
or on the instrument cluster will flash
continuously. Releasing the switch to the
original position can stop the flashing.
CAUTION
If the corresponding indicator lamp or
on the instrument cluster flashes at the
doubled frequency, one of the turn signal
lamps may be faulty, and in this case,
please go to the GAC Motor authorized
shop for inspection in time.
Lamp switch
When the ignition is in the “ON” position, turn
the lamplight control switch
①
to turn on or off
AUTO (automatic headlamp on/off function),
(position lamp), and (low beam).
When the lamplight switch is turned to the
“OFF” position, all lamps will go out.
