63
4. Operation of systems and equipment
Setting of second height of liftgate:
When the height of opening of liftgate is
55%~98%, press and hold the inside switch
of liftgate for 2 s to set the second height of
liftgate successfully.
CAUTION
As the inside switch of liftgate sends an
action signal that does not identify opening
or closing, the liftgate will confirm the
relevant action according to the current
state and the last action. For example, if the
opening action was previously suspended,
pressing the inside switch will close the
liftgate, and vice versa.
Control of power liftgate through car model
in center console display
After the AV system works normally, click
on “3D car model in smart scenario” in the
main interface or the “My Car” soft key in the
application menu interface to enter the My Car
interface.
-
If you click “Liftgate” → “Open liftgate” or
“Close liftgate” button, the liftgate will be
opened or closed electrically.
-
Drag the liftgate icon to set the target
positions of 20%, 40%, 60%, 80% and
100%, and release the liftgate icon to
allow the liftgate to move to the set target
positions.
-
In this process, drag the liftgate icon again
to suspend opening/closing of the liftgate.
-
When the height of opening of liftgate is
55%~98%, click “Memory position” to set
the second height of liftgate successfully.
-
Click “Clear memory position” to clear the
second height of liftgate successfully.
Voice control of power liftgate
After you wake up the voice recognition system
and hear a beep, you can perform the voice
control of the power liftgate.
-
When the driver gives the voice command
“open the liftgate”, the liftgate will be
opened electrically.
-
When the driver gives the voice command
“close the liftgate”, the liftgate will be
closed electrically.
