125
4. Operation of systems and equipment
Voice*
After the AV system is turned on and works
normally, wake up the voice recognition engine
in the following ways before issuing a voice
command to the voice recognition engine that
needs to be waken up:
-
Press the button on the right side of the
steering wheel to enter the voice mode.
-
Wake-up word: The default wake-up-word
is “Hello, GAC”, and another wake-up
word can be customized.
Customize wake-up word as follows:
1. Wake up the voice assistant by saying
“Hello, GAC”, and say “Give you a name
XXX” to set another wake-up word.
2. The user can set the voice function
through “Settings → Voice Settings →
Voice Assistant”.
After you wake up the voice recognition engine
and hear a beep, you can perform the voice
control setting.
NOTE
Whether the voice recognition can work
is affected by external factors such as the
objective environment (including ambient
noise, network signal, etc.), user habits
and pronunciation. The specific recognition
effect depends on the usage scenarios of
the actual vehicle.
Voice settings*
Enter the “Settings→Voice Settings→Voice
Assistant” interface of the AV system to set the
voice function, and select on/off.
