manualshive.com logo in svg

GAC MOTOR All New GS8, Manual

Share
Download
GAC MOTOR All New GS8 Manual Download Page 55

49

4. Operation of systems and equipment

No.

Icon

Designation

Color

Function

29

Position lamp indicator lamp

Green

If the green indicator lamp comes on, it indicates that the position lamp, instrument panel 

lamp, license plate lamp, etc. are on.

30

Rear fog lamp indicator lamp

Yellow

If the yellow indicator lamp comes on, it indicates that the rear fog lamp is on.

31

BSD system status indicator lamp *

Green

If the green indicator lamp comes on, it indicates that the BSD system is activated.

Yellow

If the yellow indicator lamp comes on, it indicates that the BSD system is faulty.

32

Hill descent control (HDC) indicator 

lamp

Yellow

If the yellow indicator lamp comes, it indicates that the HDC system is activated.

33

Hands off warning lamp*

Green

If the green indicator lamp comes on, it indicates that hands on steering wheel is detected by 

ICA.

Yellow

If the yellow indicator lamp comes on, it indicates that hands off steering wheel is detected by 

ICA.

34

LKA status indicator lamp*

Gray

If the gray indicator lamp comes on, it indicates that ICA is in standby state.

Blue

If the blue indicator lamp comes on, it indicates that ICA is activated.

Yellow

If the yellow indicator lamp comes on, it indicates that ICA is faulty.

35

Rear seat belt indicator lamp

White

If the white indicator lamp comes on, it indicates that the corresponding rear seat belt is 

fastened.

Red

If the red indicator lamp comes on, it indicates that the rear seat belt is not fastened or the 

seat belt system is faulty.

36

4WD locking mode indicator lamp*

Green

If the green indicator lamp comes on, it indicates that the 4WD is currently in locking mode.

37

4WD intelligent mode indicator lamp*

Yellow

If the yellow indicator lamp comes on, it indicates that the intelligent 4WD system is 

overheated.

Note:  If any indicator or warning lamp on the instrument cluster comes on after the vehicle is started or during driving, it indicates that the related 

system or function is in a certain working state or faulty. Therefore, you should read carefully and understand the meaning of each indicator or 

warning lamp. In case of a fault, please go to or contact the GAC Motor authorized shop for inspection in time.

Summary of Contents for All New GS8





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands