151
5. Driving guide
CAUTION
Do not use dynamic emergency braking
unless necessary, as it is likely to
cause traffic accidents. Moreover, the
braking distance is longer than braking
by depressing the brake pedal, and the
service life of the parking brake system will
be shortened.
NOTE
● If you pull up the EPB button when the
vehicle is running, the instrument cluster
display will give a visible warning tell-tale
together with an audible beep alarm.
● If you release the EPB or depress
the accelerator pedal during dynamic
emergency braking, the EPB will be
released. If the EPB button is pulled up
until the vehicle stops, the EPB will remain
engaged.
AUTO HOLD
On and Off
-
When the engine is started, the driver’s
door is closed and the driver’s seat belt is
fastened, press the AUTO HOLD button.
Then, the button indicator lamp comes on,
and the AUTO HOLD is enabled. Press
this button again. The button indicator
lamp goes out, and the AUTO HOLD is
disabled.
Activation
When this function is enabled, it supports
automatic brake application and release under
stop & go conditions. When the driver brakes
the vehicle, the vehicle will be automatically
parked to avoid slide at startup.
Exit
Under the following conditions, AUTO HOLD
will be disabled and the parking brake will not
be locked:
1. The accelerator pedal is depressed at
startup.
2. The engine stops while the vehicle is
running.
3. The EPB is manually released.
4. The AUTO HOLD button is pressed when
the brake pedal is depressed.
