197
5. Driving guide
-
In the panoramic image, a red light bar
flashes at the rear of the vehicle on the
side with risk of collision.
-
When the driver selects the assist
mode as the brake mode, the system
will actively activate the brakes until the
vehicle comes to a standstill.
CAUTION
This function cannot penetrate through
another vehicle or obstacle and detect
objects behind it.
False alarm
When there is no vehicle in the detection area,
the system may issue a false alarm in case of
the following conditions:
-
The vehicle is near a road guardrail.
-
The vehicle is near a highway concrete
wall.
-
The vehicle is in a building area.
-
The vehicle is passing a sharp turn
around a building.
-
The vehicle is near shrubs and trees.
-
The vehicle is too close to the vehicle
behind during parking.
-
The vehicle is in an indoor parking area.
CAUTION
The false alarm, if triggered, just lasts
for a short time and can be corrected
automatically.
5.4.12 R e a r a p p r o a c h a l e r t
system*
The rear approach alert function monitors the
target directly behind the vehicle in real time
through the BSD sensor installed at the rear of
the vehicle. When the driver drives the vehicle
normally on the road and there is a target
rapidly approaching in this lane behind, the
system will send out an alarm message and a
rear-end collision warning signal to the vehicle
behind.
