189
5. Driving guide
Activating IHC
1. With the ENGINE START/STOP button
in “ON” position, go to “Settings → Body
Accessories → Lamps” in the AV system,
and press the
soft key on the right
side of “IHC” to activate this function.
NOTE
The IHC has the memory function, so that
it will work in the state before last shutdown
when the vehicle is restarted.
2. Turn the lamp switch to AUTO position
to switch on the automatic headlamp
function.
-
After the intelligent headlight control
function is enabled, it is in a standby
state. When high beam conditions are not
met or the driver does not manually turn
on the high beams, the indicator lamp
on the instrument cluster will be white.
-
When the intelligent headlight control
function is enabled, if high beam
conditions are met, the system will
automatically switch to the high beam, and
the indicator lamp
on the instrument
cluster will turn blue.
Deactivating IHC
If one of the following conditions is met, turn off
the intelligent headlight control function:
-
Turn the lamp switch to a position other
than AUTO.
-
Go to “Settings → Body Accessories →
Lamps” in the AV system, and press the
soft key on the right side of “IHC” to
deactivate this function.
-
Shut down the engine.
NOTE
● The high beam and headlamp flashing
light can be manually switched on/off
when required.
● In the case of heavy fog, rain, etc.,
which may cause dazzling to the driver,
a request to turn on low beam will be
initiated.
Disabling conditions of IHC
The high beam will be disabled when:
-
The driver turns on the high beams
manually.
-
The vehicle speed is less than 15km/h.
-
The fog lamps are turned on.
-
The wipers are turned to the HI position
for a period of time.
-
The ambient light is brighter than the
threshold.
-
A street light, a near vehicle ahead or an
oncoming vehicle is detected.
The high beam will not be actively activated
when:
-
Driving is violent, turns are sharp, ABS or
ESP is activated, etc.
