73
4. Operation of systems and equipment
WARNING
● The anti-pinch function of the sunroof
cannot prevent pinching of light or
thin objects.
● When closing the sunroof, make sure
that no one is within the movement
range of the sunroof to avoid
unexpected pinching.
● The sunroof will stop detecting
obstacles at a position where the
sunroof is about to be closed fully,
so the anti-pinch function will be
deactivated at this time.
● Do not try to activate the anti-pinch
function by your hand or any part of
your body, otherwise there will be a
risk of pinching.
Locking-sensitive sunroof closing function
If you close and lock the doors without closing
the sunroof (door locking by remote control key,
or intelligent door locking when you leaving the
vehicle), the system will automatically close
the sunroof to prevent the vehicle from being
damaged. This function can be activated or
deactivated via “Settings → Body Accessories
→ Other Accessories → Automatic Window
Closing When Hirecar” in the AV system. If the
sunroof fails to be closed automatically due to
abnormal conditions such as activation of anti-
pinch function, the horn will sound 4 times to
remind the user that the sunroof closing fails.
Rain-sensitive sunroof closing function
If rain is detected with IGN OFF, the sunroof
will automatically close.
CAUTION
The locking-sensitive sunroof closing
function and the rain-sensitive sunroof
closing function are effective only when
the sensor, battery SOC and other relevant
parts are normal. Do not leave the vehicle
until it is confirmed that the sunroof is fully
closed.
Initialization and learning of sunroof
1. Both sunroof and sunshade are not
initialized.
-
Continuously press forward the sunroof
switch
①
or the sunshade closing switch
②
.
-
The sunroof moves to the fully closed
position with sunshade still, and then,
close the sunroof by operating the sunroof
switch to complete initiali-zation.
-
With sunroof still, make the sunshade
move to the fully closed position to
complete initialization.
-
Release sunroof switch
①
and the
sunshade closing switch
②
to end the
initialization of sunroof and sunshade.
