GAC MOTOR All New GS8 Manual Download Page 233

Page: 233 / 308

227

5. Driving guide

When the AVM starts working, the 2D view will

be shown:

⑥

2D view interface: 4 camera views, that

is, front, rear, left and right views. The

cameras can be selected to switch among

the reversing images.

⑦

Trajectory.

NOTE

● The description of display interface

is for reference only. In case of any

discrepancy, the actual vehicle shall

prevail.

● The 3D view interface can be shown by

touching the

view button.

● When the gearshift lever is moved to

“R” position, the rear view interface will

be shown by default; when the gearshift

lever is moved out of the “R” position,

the front view interface will be shown by

default.

Summary of Contents for All New GS8





















































































































































































































































































































Search results

Summary of Contents for All New GS8

Reviews:

Related manuals for All New GS8

Brands by name

Popular brands

GAC MOTOR All New GS8, Manual

Search results

Summary of Contents for All New GS8

Reviews:

Related manuals for All New GS8

Brands by name

Popular brands