229
5. Driving guide
AVM DVR
The AVM is integrated with a data video
recorder (DVR), and after a TF card is inserted,
the real-time image, album and setting
functions of DVR can be operated. The DVR
collects and processes the video taken in the
front, rear, left and right sides of the vehicle,
and displays and plays the video on the AV
system display; the recorded videos are stored
in the TF card of the AVM ECU.
When the vehicle power switch is set to
“ON” position, the AVM background will start
video recording by default. After the TF card
is installed and the loop recording switch is
turned on in the Settings, the user can enter
the DVR interface in the following two ways:
1. Enter the system menu interface by
touching the icon in the AV system
menu bar, and then touch the “REC” icon
to turn on the DVR function.
You can say, "I want to hear Jay Chou's songs."
User
Real-time image
Album
Setting
Recording
Photographing
Emergency recording
2. Touch the icon
REC
①
in the status bar at
the top right of the AV system interface to
turn on the DVR function.
NOTE
● The vehicle is not installed with a TF
card upon delivery. Users need to buy
a TF card before use. The TF card shall
meet the CLASS10 standard and has a
capacity above 16G.
● Do not pull out the TF card directly
during video recording, and instead,
operate after the power supply is cut off.
Installation location of DVR TF card
-
The TF card installation location is behind
the bottom of the front passengers’ seat,
and it can be accessed by unfastening the
hook & loop fastener on the carpet.
