191
5. Driving guide
Turn on the adaptive driving beam system
1. With the ENGINE START/STOP button
in “ON” position, go to “Settings → Body
Accessories → Lamps” on the AV system
display, and press the soft key
on
the right side of “Adaptive driving beam”
to turn on it, so the ADB function enters
the standby state. When this function is
turned off, the vehicle cannot trigger the
ADB function.
2. Turn the lamplight switch to the AUTO
position
①
and the low beam position.
Provided that the ambient brightness is
low and the low beam is automatically
turned on, if the vehicle speed is greater
than 25km/h, the adaptive high beam ADB
function is allowed to be activated. At this
time, the high beam enters the intelligent
control state. If the vehicle speed is lower
than 15km/h, the adaptive high beam
function will be automatically disabled.
-
If the IFC detects that there are rows of
street lights on the current road, the high
beams will not automatically turn on.
-
On roads without street lights, the system
will automatically switch the high beam
type according to the position of the
vehicle ahead to avoid dazzling the driver
of the vehicle ahead, while maintaining
high beam lighting in other areas.
