149
5. Driving guide
WARNING
When the vehicle is running, do not apply
the EPB for speed reduction unless
necessary, as the EPB only applies braking
force to rear wheels, which is likely to
cause traffic accidents.
NOTE
● The EPB can also be applied when the
vehicle power switch is set to “OFF”
position.
● After the vehicle is parked steadily, the
EPB should be applied first.
● When the EPB is working, operating noise
can be heard, which is normal.
● If the vehicle is coupled with a trailer or
is to be parked on a steep slope, it is
recommended to pull up the EPB button
again after the first application of EPB to
ensure the maximum braking effect.
NOTE
● On a slope with a gradient of 17% to 30%,
in 5 minutes after the EPB is applied for
the first time, it will be applied again. At this
time, operating noise can be heard, which
is normal.
● Be sure to apply the EPB during parking.
Release static park brake
-
When the vehicle power switch is set to
“ON” position, depress the brake pedal.
-
Press the EPB button as arrowed. The
button indicator lamp and the indicator
lamp
on the instrument cluster will
go out, indicating that the EPB has been
released.
