168
5. Driving guide
NOTE
● When driving through crossroads,
speed bumps, steep roads and zebra
crossings, or at changing lanes,
highway access, ramps or construction
sections, it is required to exit ACC for
manual driving, lest the vehicle should
be automatically accelerated to the set
speed, causing traffic accidents.
● ACC can automatically drive the vehicle
out after a short stop or confirmation
from the driver (control of buttons or
accelerator pedal). During this period,
the driver must ensure that there are
no obstacles or other traffic participants
such as pedestrians or bicycles in front
of the vehicle.
● If ACC fails to function properly, stop
using it, and go to the GAC Motor
authorized shop for inspection in time.
NOTE
● ACC may not respond under certain
circumstances. for example, when
your vehicle approaches a stationary
obstacle such as a broken-down vehicle
or a vehicle stuck in traffic jams, or
when a vehicle traveling in the same
lane approaches your vehicle.
● ACC can only provide limited braking
force, and thus cannot be used for
emergency braking.
● Prevent placing your foot on the
accelerator pedal when not required;
otherwise, ACC cannot function for
braking, as the depressing of accelerator
pedal will cause excessive control of
vehicle speed and distance.
● When the vehicle is traveling in heavy
rain or snow such that ACC is difficult or
unable to identify the vehicle ahead, it is
required to switch off the ACC.
NOTE
● When ACC is turned on, its status
displayed on the instrument cluster
display may be overwritten by other
functions (for example, during a
telephone call).
● When ACC brakes the car automatically
after activation, there will be a sound
different from manual braking sounds
or the brake pedal will be depressed
automatically, which is normal. Such
sound and pedal action are caused by
the operation of the brake system, so
there is no need to worry.
● The stored cruising speed will be
deleted after the vehicle is powered off.
● The accelerator pedal can be depressed
when required to increase the vehicle
speed. After the accelerator pedal is
released, ACC will readjust the vehicle
speed to the previously set cruising
speed.
● If the vehicle enters a tunnel, the radar
and camera may enter the blind mode,
and ACC may be turned off temporarily.
