150
5. Driving guide
NOTE
●
If the EPB cannot be released statically
when the gearshift lever is at “P”
position, the instrument cluster will give
an alarm to remind you.
●
If the EPB button is pressed without
depressing the brake pedal, the EPB
will not be released, and the instrument
cluster will give a visible warning tell-tale
together with an audible beep alarm.
●
When the EPB is being released,
operation noise will occur, which is
normal.
●
When the battery is low, the system
cannot release the EPB. If conditions
permit, you can connect a jumper cable
for emergency start, and then release
the EPB. Contact the GAC Motor
authorized shop for inspection.
●
If the EPB has not been used for a long
time, the system will perform automatic
test, and operation noise will be heard
at this time.
Application of dynamic emergency brake
-
During driving, dynamic emergency
braking can be achieved by pulling up
the EPB button continuously as arrowed.
If the accelerator pedal is depressed
during the emergency braking process,
the system will release the brake. If a
non-driver operation causes emergency
braking, please depress the accelerator
pedal to the floor repeatedly to release the
brake.
CAUTION
In the following cases, operate the EPB
button again. If the fault is not eliminated,
please contact the GAC Motor authorized
shop for inspection.
● If the indicator lamp
flashes red
continuously, it indicates that the EPB
is partially engaged/disengaged or the
system is malfunctioning.
● If the indicator lamp
comes on in red
when EPB is not applied, it indicates
that the system is abnormal.
● If the indicator lamp
comes on in
yellow, it indicates that a fault is detected
in EPB and the EPB is degraded.
