GAC MOTOR All New GS8 Manual Download Page 219

Page: 219 / 308

213

5. Driving guide

5.4.19 Head-up display (HUD)*

HUD description

The head-up display or heads-up display is

referred to as HUD for short. The HUD image

is projected onto the front windshield through

the HUD device in the instrument cluster.
The HUD image will automatically darken or

brighten to compensate for changes in outside

light. The brightness of the HUD image can be

adjusted manually if necessary. Depending on

the angle and position between the sunlight

and the HUD, the HUD image will temporarily

brighten, which is normal.

NOTE

● Make sure the HUD image is in proper

brightness and in comfortable field of

view.

● Polarized sunglasses may make it

harder to see the HUD image.

Interface display

①

Adaptive /integrated cruise control is

working

②

ADAS state

③

Speedlimit sign

④

Vehicle speed

⑤

Navigation information

⑥

Blue line: the lane keeping assist function

is triggered

Summary of Contents for All New GS8





















































































































































































































































































































Search results

Summary of Contents for All New GS8

Reviews:

Related manuals for All New GS8

Brands by name

Popular brands

GAC MOTOR All New GS8, Manual

Search results

Summary of Contents for All New GS8

Reviews:

Related manuals for All New GS8

Brands by name

Popular brands