205
5. Driving guide
CAUTION
● Bodywork of the front end of vehicle
may change the direction of the radar
sensor and affect the related functions
of the MMW radar (ACC */ ICA */ FCM *).
Therefore, please go to the GAC Motor
authorized shop for service in time.
● If the MMW radar sensor is damaged or
its direction changes, please deactivate
its related functions (ACC */ ICA */ FCM
*), and go to the GAC Motor authorized
shop for recalibration in time.
● The direction of the MMW radar sensor
may be changed due to vibration, for
example, when the part near the front
bumper radar bumps against a curb/
flower bed. Change of the direction of
the sensor may affect the performance
of the functions dependent on the radar
or even cause abnormal deactivation of
these functions.
IFC
An IFC is installed on the upper part of the
windshield glass to detect the surrounding
environment, which can identify pedestrians up
to 80m away from the vehicle when no obstacle
is present (in case that the environmental
factors such as lighting are ideal) with a height
not less than 0.8m. The IFC sensor must be
calibrated under the following conditions:
-
The windshield or the camera bracket has
been removed and replaced.
-
The IFC sensor has been removed and
replaced.
NOTE
If the IFC fails, ACC *, ICA *, LDW *, FCM *
and IHC * will fail as well.
NOTE
● Special tools are required to be used for
calibration of the IFC. If the calibration
of the IFC sensor is required, please go
to the GAC Motor authorized shop for
relevant operation.
● When the IFC sensor fails or is
maladjusted or blocked, the normal
operation of the functions such as ACC *,
FCM *, LDW *, ICA * and IHC * may be
affected.
