78
4. Operation of systems and equipment
NOTE
If you forget to turn off the position lamps
when the ignition is switched to the “OFF”
position and the vehicle is not locked,
the position lamps will stay on for 15 min
and then go out automatically in order to
save the battery power; when the ignition
is switched to the “OFF” position and the
vehicle is locked, the position lamps will go
out immediately.
WARNING
● When driving the vehicle at night or
on a road with poor visibility, also use
other lamps in addition to the position
lamp. Otherwise, accidents may easily
occur.
● When temporarily parking the vehicle
at night or on a road with poor visibility
with the need of indicating the position
of the vehicle, do not use the position
lamps as the parking lamps but be sure
to turn on the hazard warning lamp due
to the battery power saving function of
the position lamps.
Low beam
-
Turn the lamplight control switch to the
position to turn on the low beam.
High beam
-
After turning on the low beam, if you push
the lamplight combination switch forward
to the limit position, the high beam will be
turned on and the corresponding indicator
lamp
on the instrument cluster will
come on.
-
If you pull the lamplight combination
switch backward to the original position,
the high beam will be turned off.
Headlamp flashing
-
If you pull the lamplight combination
switch backward to the limit position, the
high beam will be turned on.
-
If you release the switch, the lamplight
combination switch will automatically
return to its original position and the high
beam will be turned off.
NOTE
● The high beam may cause dazzling to
drivers of oncoming vehicles at close
range and possibly result in an accident
thereafter. Therefore, please use the high
beam reasonably.
● When all the lamps are turned off, if you
pull and hold the lamplight combination
switch backward, the high beam will stay
on, and the corresponding indicator lamp
on the instrument cluster will come
on.
