139
5. Driving guide
5.1.1 E N G I N E S TA R T / S T O P
button
The ENGINE START/ STOP button works
only when the intelligent remote control key is
detected in the vehicle.
5.1 Starting and driving
When the transmission gearshift lever is in “P”
position and the brake pedal is depressed,
the ENGINE START/STOP button backlight
will turn green. At this time, press the ENGINE
START/STOP button to start the engine.
When the transmission gearshift lever is set
to “P” position and the brake pedal is not
depressed, press the ENGINE START/STOP
button to switch between positions in the
following order: “OFF → ACC → ON → OFF”.
-
OFF: The ENGINE START/STOP button
backlight goes out, and the ENGINE
START/STOP button is switched off.
-
ACC: The ENGINE START/STOP button
backlight turns orange, and the 12V
power supply and other accessories can
be used.
-
ON: The ENGINE START/STOP button
backlight turns orange, the instrument
cluster backlight comes on, and all
electrical consumers can be used.
5. Driving guide
Limphome mode
When “No key detected” appears on the
instrument cluster display due to low battery
of the intelligent remote control key, you can
try to place the key horizontally at the mark on
the bottom of the front cup holder, then press
the ENGINE START/STOP button to switch
it to “ACC” or “ON” position and depress the
brake pedal, and after the ENGINE START/
STOP button backlight turns green, press the
ENGINE START/STOP button to start the
engine.
This method is intended for emergency start.
Please replace the battery of the intelligent
remote control key as soon as possible.
