manualshive.com logo in svg

GAC MOTOR All New GS8, Manual

Share
Download
GAC MOTOR All New GS8 Manual Download Page 52

46

4. Operation of systems and equipment

4.1.3  Indicator lamp

No.

Icon

Designation

Color

Function

1

Charging system warning lamp

Red

This warning lamp will come on when the engine is not started with the vehicle power switch 

set to “ON” position, and will go out after the engine is started.
If this warning lamp comes on after the engine is started, it indicates that the charging system 

is faulty.

2

Malfunction indicator lamp

Yellow

If there is no fault, this indicator lamp will come on and stay on for a few seconds when the 

engine is not started with the vehicle power switch set to “ON” position, and then will go out 

after the system self-test.
If this indicator lamp comes on after the engine is started, it indicates that the engine system 

is faulty.

3

Low oil pressure warning lamp

Red

This warning lamp will come on when the engine is not started with the vehicle power switch 

set to “ON” position, and will go out after the engine is started.
If this warning lamp comes on after the engine is started, it indicates that the engine oil 

pressure is low.

4

Emission fault indicator lamp

Yellow

This indicator lamp will come on when the engine is not started with the vehicle power switch 

set to “ON” position, and will go out after the engine is started.
If this indicator lamp comes on after the engine is started, it indicates that the exhaust system 

is faulty.

5

Left turn signal indicator lamp and 

hazard warning lamp

Green

When the left turn signal indicator lamp flashes alone, it indicates that the left turn signal lamp 

of the vehicle is on.

When the hazard warning lamp switch is pressed, the left / right turn signal indicator lamps 

and all turn signal lamps outside the car will flash simultaneously.

6

High engine coolant temperature 

indicator lamp

Red

If the red indicator lamp comes on, it indicates that the engine coolant temperature is too 

high.

7

Supplemental restraint system (SRS) 

indicator lamp

Red

If the red indicator lamp comes on, it indicates that the SRS system is faulty.

8

Low fuel level indicator lamp

Yellow

If the yellow indicator lamp flashes, it indicates that the fuel level of the fuel tank is low.

If the yellow indicator lamp comes on, it indicates that the fuel pump may be faulty.

Summary of Contents for All New GS8





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands