201
5. Driving guide
False alarm
When there is no vehicle in the detection area,
the system may issue a false alarm in case of
the following conditions:
-
The vehicle is near a road guardrail.
-
The vehicle is near a highway concrete
wall.
-
The vehicle is in a building area.
-
The vehicle is passing a sharp turn
around a building.
-
The vehicle is near shrubs and trees.
-
The vehicle is too close to the vehicle
behind during parking.
CAUTION
The false alarm, if triggered, just lasts
for a short time and can be corrected
automatically.
5.4.14 Emergency lane keep aid
(LKA) system*
-
A: Blind spot in the adjacent lane.
-
B: Area behind the blind spot.
-
C: incoming area in the adjacent lane.
The emergency lane keeping aid function
monitors the adjacent lane area in front and
behind the vehicle in real time through the
rear BSD sensor, IFC and front IFC. When the
vehicle deviates from the lane and there is a
risk of collision with vehicles in the adjacent
lane, the system will alert the driver and
actively keep the vehicle in the lane to reduce
the risk of collision.
On and Off
With the ENGINE START/STOP button in “ON”
position, go to “Settings → Driving Assistance
→ Lateral Driving Assistance” in the AV
system, and press the
soft key on the right
side of “Emergency Lane Keeping” to activate
or deactivate this function.
NOTE
● When the driver turns on the emergency
lane keep assist function, the blind
spot detection function is automatically
turned on.
● The system has the button state
memory function, so when the vehicle is
restarted, the system will be in the state
before last shutdown.
