90
4. Operation of systems and equipment
-
Click the “Setting” soft key for automatic
angle adjustment of exterior rearview
mirror to adjust the exterior rearview
mirrors on both sides to suitable positions
for reversing. After the adjustment, click
the “OK” soft key, and then this position
is memorized as the tilt-down position of
exterior rearview mirror when reversing.
The reverse tilt-down function is only a reverse
assistance function for users, and is off by
default; users can switch on the reverse
tilt-down function and set the reverse tilt-
down position by selecting “Settings → Body
Accessories → Other Accessories →Reverse
Tilt-down*” on the AV system display. When
you move the shift lever to R, the rearview
mirrors on both sides will tilt down, and when
you shift out of the “R” position, the mirror will
automatically return to the original position. If
the reverse tilt-down function is switched off,
the rearview mirror will not tilt down when you
move the shift lever to R.
4.3.6 Sun visor
-
Turn down the sun visor on the driver’s
side or front passenger’s side in the
direction of arrow A to shelter from
the incoming sunlight from the front
windshield.
-
To use the vanity mirror, flip down the
sun visor and pull open the vanity mirror
cover in the direction of arrow B, and
then the vanity mirror lamp * comes on
automatically.
-
After turning down the sun visor on the
driver’s side or front passenger’s side,
pull it out from the movable bracket in the
direction of arrow C to shelter from the
incoming sunlight from the side window.
NOTE
If the vanity mirror cover is opened, the
vanity mirror lamp will go out automatically
a few minutes after the ignition is switched
to the “OFF” position or the vehicle is
locked.
