161
5. Driving guide
no target vehicle ahead; if the blue ACC
indicator lamp comes on, it indicates
that ACC is working, and there is no target
vehicle ahead.
-
If the yellow ACC indicator lamp
comes on, it indicates that ACC is faulty.
In that case, go to the GAC Motor
authorized shop for inspection in time.
②
indicates the stored cruising speed.
③
indicates the detected vehicle ahead.
④
indicates the set cruising distance from
the vehicle ahead.
When the braking capacity of ACC is not
enough to maintain a proper distance from
the vehicle ahead, ACC will send a message
reading “Please take over the steering wheel
immediately”, and the instrument cluster will
give a visible alarm and an audible alarm. In
this case, the driver shall depress the brake
pedal to reduce the vehicle speed according to
the system requirements.
Activating ACC
-
I f t h e b u t t o n
i s p r e s s e d , t h e
corresponding blue indicator lamp
on
the instrument cluster will come on, and
the vehicle will enter the ACC status.
NOTE
● The minimum setable target cruising
speed is 30 km/h.
● When the transmission is in other
positions than D, ACC cannot be
activated.
Canceling ACC
ACC can be canceled by:
-
opening the driver’s door.
-
unfastening the driver’s seat belt.
-
Depress the brake pedal.
-
setting the gearshift lever to a position
other than D.
-
pressing the button
(after that, the
corresponding indicator lamp on the
instrument cluster will turn gray, ACC will
be deactivated, but the set speed will be
kept).
-
pressing the EPB button.
-
deactivating the ESP.
-
activating the HDC.
If deactivated by the following ways, ACC may
be resumed by moving up the multi-function
“OK” button:
-
depressing the brake pedal.
-
pressing the button
.
-
setting the gearshift lever to a position
other than D (the gearshift lever should be
moved to D position).
-
pressing the EPB button (it is required to
release EPB).
-
switching off the ESP (it is required to
switch on the ESP for resuming the ACC).
