220
5. Driving guide
The rear ultrasonic radar sensors are installed
on the rear bumper cover.
CAUTION
● Always keep the surfaces of the RPA
sensors clean and never cover a RPA
sensor.
● Keep the RPA sensors on the bumpers
clean and protect them from freezing
to ensure the RPA sensors operate
properly.
● Clean the RPA sensor surface with
a piece of soft damp cloth to avoid
scratching.
WARNING
● The RPA cannot take the place
of the driver’s observation of the
surrounding environment. The driver
shall focus on safe reversing and
position adjustment according to the
practical conditions.
● The RPA sensors have blind spots
while they are detecting obstacles.
During reversing, the driver shall
observe the surrounding environment
carefully to avoid scratches or
collisions.
● When the vehicle is reversing at a
narrow place or on an uphill slope,
the RPA sensors may not detect
railings, trees or slope surfaces,
which is normal.
● When the reversing speed is high, the
detection accuracy of the RPA sensor
reduces. Thus the reversing speed
had better not to exceed 10km/h.
When the RPA sends the continuous
audible alarms, it indicates that the
vehicle is extremely close to the
detected obstacle, and reversing
shall be stopped immediately to
prevent an accident.
