Fujitsu NSS8 and NSS12 Operator'S Manual Download Page 112

Page: 112 / 230

3.9 Multi Image Output

3.9 Multi Image Output

It is possible to get an output both in Color/Grey scale and binary black and white.

The MultiStream setting can be done on the Scanner Driver.

The following operation uses the TWAIN driver.

Start TWAIN Driver from your scanning application.

Refer to

“2.13 How to use the Scanner Driver” on page 41

Please check the [Enable Multi Image] checkbox in the [TWAIN Driver] window.

Main screen

⇒

The [Multi image output] dialog box will be displayed.

ABC

Original

Output

Example

：

Color document scanned with Multi Image.

Summary of Contents for NSS8 and NSS12







































































































































































































































Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands

Fujitsu NSS8 and NSS12, Operator'S Manual

Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands