Fujitsu NSS8 and NSS12 Operator'S Manual Download Page 138

Page: 138 / 230

118

5.2 How to check and reset the Consumables Counter

Select the [Device Settings] tab.

In this window, the following items can be confirmed.

Number of scans (ADF):

The total number of scanned sheets.

Pad:

The number of sheets scanned since last exchange of the Pad.

Brake roller:

The number of sheets, scanned since last exchange of the Brake
roller.

Pick rollers:

The number of sheets, scanned since last exchange of the Pick
rollers.

Separator rollers:

The number of sheets, scanned since last exchange of the Separa-
tor rollers.

Remaining ink:

The remaining ink of the imprinter (sold separately) ink cartridge.
(Only displayed when the imprinter option is used)

Summary of Contents for NSS8 and NSS12







































































































































































































































Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands

Fujitsu NSS8 and NSS12, Operator'S Manual

Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands