Fujitsu NSS8 and NSS12 Operator'S Manual Download Page 160

Page: 160 / 230

140

6.3 Troubleshooting

(*)

Refer to

“4 DAILY CARE” on page 99.

YES

Are the transport path, the glass sur-
face, the rollers and the Pad clean?

Is the scanner exposed to vibrations
during scanning?

Clean the dirty locations. (*)

Do not shake or move the
scanner when scanning.

Symptom 6

Images are distorted or blurred.

YES

Is the scanner installed on a flat,
sturdy surface?

Install the scanner on a flat,
sturdy surface.

If the problem canot be resolved with this flowchart, refer to "6.4
Before contacting a service partner."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.

Summary of Contents for NSS8 and NSS12







































































































































































































































Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands

Fujitsu NSS8 and NSS12, Operator'S Manual

Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands