Fujitsu NSS8 and NSS12 Operator'S Manual Download Page 145

Page: 145 / 230

125

5.5 Replacing the Separator Rollers

REPLA

EMENT OF CONSUMABLES

Slide Separator rollers (2 rollers, left and right) away from each other
along the shafts for removal as shown below.

⇒

The shaft will be locked in outer position and stays there.

Remove the rollers

from their shafts.

Remove both, the left and the right rollers.

Put the new rollers (2 rollers, left and right) on the shafts.

Align the screw with the groove on the Separation roller to put the roller on the shaft.

Separator roller

Shaft

Separator

roller

Shaft

Groove

Screw

Summary of Contents for NSS8 and NSS12







































































































































































































































Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands

Fujitsu NSS8 and NSS12, Operator'S Manual

Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands