Fujitsu NSS8 and NSS12 Operator'S Manual Download Page 83

Page: 83 / 230

2.13 How to use the Scanner Driver

BASIC SCANNER OPERA

IONS

Counter

Specifies the rule of display.

Initial Value:

You can specify the initial vale.

Field Width:

You can specify the number of digits for the counter.

Number Control:

You can specify the number by which the counter is
incriminated/decremented.

Top Margin:

Specifies the location where the printed string of characters starts.

Setting range:

0.5 to 10.5 in.(1.27 to 26.7cm)

Minimum unit:

0.1 in.(0.01cm)

Units:

Selects a unit for Top Margin values i(nch, cm, or pixel).

Font:

Selects the font to use for printing (Normal, Bold, or Narrow).

Rotation:

Specifies the orientation of strings of characters.

Summary of Contents for NSS8 and NSS12







































































































































































































































Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands

Fujitsu NSS8 and NSS12, Operator'S Manual

Search results

Summary of Contents for NSS8 and NSS12

Reviews:

Related manuals for NSS8 and NSS12

Brands by name

Popular brands