Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set fc-parameters
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
199
■
Example(s)
The following example sets up the parameters to control FC interface port #0 on CM#1 CA#1. Host Affinity
Mode is disabled:
CLI> set fc-parameters -port 110 -host-affinity disable
The following example sets up the parameters to control FC interface port #1 on CM#0 CA#0. The FC port is a
fabric connection:
CLI> set fc-parameters -port 001 -connect fabric
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......