Fujitsu Eternus DX410 S2, Cli User'S Manual

Page: 604 / 756

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > shutdown
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
604
shutdown
This command will power off or power cycle (power off and on) the system. The CLI session is automatically
closed.
■ Syntax
■ Parameter
■ Example(s)
• The ETERNUS Disk storage system is shutdown and then restarted regardless of the power
synchronization setting.
• When power synchronization is enabled and the ETERNUS Disk storage system is shut down by this
command, the ETERNUS Disk storage system may automatically restart according to the power control
process of the server.
shutdown -mode {off | reboot}
-mode This parameter specifies the shutdown mode.
off Power off the system.
reboot Power OFF and power ON the system.
The following example powers off the system:
CLI> shutdown -mode off
The following example powers the system off and on:
CLI> shutdown -mode reboot