Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
280
■
Output
-port-group-number
or
-port-group-name
Optional. This parameter specifies the port group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
. If omitted, this parameter is ignored.
-host-group-number
or
-host-group-name
Optional. This parameter specifies the host group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
. If omitted, this parameter is ignored.
# CM#0 CA#0 Port#0
# Host Affinity/LUN Group Multi-Group
# No. Name No. Name Volumes
# 1 HBA1 4 AG004 No
A B C D E
A:
Host number
B:
Host name
C:
Affinity group number or LUN group number
D:
Affinity group name or LUN group name
E:
It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
When a host affinity is set for the port group (Host Affinity Mode is enabled)
# Port Group Host Group Affinity/LUN Group Multi-Group
# No. Name No. Name No. Name Volumes
# 2 pg01 1 FCoE 1 ag2 No
A B C D E F G
# <Connection List>
# Port Host
# No. Name
# CM#0 CA#0 Port#0 -
# CM#0 CA#0 Port#1 7 FCoE#2
H I J
A:
Port group number
B:
Port group name
C:
Host group number
D:
Host group name
E:
Affinity group number or LUN group number
F:
Affinity group name or LUN group name
G:
It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
G:
Port number
H:
Host number
K:
Host name
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......