background image

ETERNUS CLI User’s Guide

Copyright 2015 FUJITSU LIMITED

P2X0-1030-09ENZ0

356

 

Chapter 4  

Function/System Settings and Display

This chapter explains the commands related to the following functions:

User account management

Advanced Copy management

Network management (Redundant IP/SNMP etc.)

SSH/SSL security configuration

Date and Time/NTP

System configuration (ETERNUS DX Disk storage system name, Box ID, encryption)

Power synchronization

Self-Encrypted Disk (SED) authentication settings

syslog server settings

Audit log settings

Key management server linkage function

Shutdown/system restart

4.1

User Management

This section explains the commands that manage a user account and a password.

4.1.1

Role

Roles define the user roles and the policies based on the definitions that are assigned to each role. Policies
are given to users as roles. There are default roles that are preset in the ETERNUS DX Disk storage system and
user-defined roles (custom roles). The following table shows the roles and their policies.

Default roles

The default roles and corresponding policies are shown in the following table.

User policy

Default role

Monitor

Admin

Storage

Admin

Account

Admin

Security

Admin

Maintainer

Software 

(*1)

Status Display

Yes

Yes

Yes

Yes

Yes

RAID Group Management

Yes

Yes

Yes

Volume - Create / Modify

Yes

Yes

Yes

Volume - Delete / Format

Yes

Yes

Yes

Host Interface Management

Yes

Yes

Yes

Advanced Copy Management

Yes

Yes

Yes

Summary of Contents for Eternus DX410 S2





















































































































































































































































































































































































































































































































































































































































































































































































Reviews: